You will be better off with Mach3 as a control software as this is widely used and supported. Is there a replacement board that can use the same Planet CNC software running on Windows 10 No, we have gotten away from the planet-cnc boards as they have decided to not support our board with their software. The y-axis no longer works and have traced it to the breakout board. Y, and Z-axis does not work, it moves step motors and controller positions X -axis works, and Y and Z does not work.I used 425 oz-in motors ABSOLUTELY NOTHING WORKS.ĪNY HELP WOULD BE APRECIATED Did you install the Mach3 USB plug-in Make sure that you followed all of the steps and diagrams on the following page.ĪNY HELP WOULD BE APRECIATED I have the older discontinued USB breakout board. 1201., and got out of your USB controller 75.Īll have linked like a video USB CNC ControllerInterface Wiring Instructions Part 2, X - running. Y, and Z-axis does not work, it moves step motors and controller positions X -axis works, and Y and Z does not work.I used 425 oz-in motors Recommend first test to check a non-working axis, is to connect the current working axis(ex X-axis) to either the yz axis to test the actual board and wiring in other axis setup.Ĭlick the link to respond: I installed the USB CNC Planet software.
0 kommentar(er)
